Service Hotline: 4000-888-699
   
Product center Products
Products
发布时间: 2018 - 04 - 11
Technical features:1. Wide voltage range inputPower voltage: -15% - 10%, 47 Hz - 63 Hz; provided with under-voltage underclocking output function that extends the applicable range of power voltage to -30% (e.g. extending the applicable range of a 380 V VFD to 266 V - 440 V); 2. High disturbance resistance Pulse group tests: ± 4,800 VStatic (air discharge): 8,000 VStatic (contact discharge): 6,000 VProvided with EMI circuit + lightning protection design3. Phase-phase and phase-to-earth short circuit protectionAny phase-phase short circuit protection 4. Anti-corrosion treatment8 µm nickel plating, and three layers of British conformal coating for key parts;5. Power source of control signals:  External power supply of +10 V and +24 V, both provided with shor...
发布时间: 2015 - 09 - 16
Technical features> Provided with an open-loop vector control permanent magnet synchronous motor, easy to wire and highly accurate in revs control, reducing on-site faults; > High dynamic responses, rapidly responding to the given value of speed while guaranteeing the stability of output revs, which allows the system to catch up with the load changes timely, thus increasing the operation efficiency of the system;> Premium overcurrent and overvoltage resistance;> The oscilloscope function of the background monitoring software monitors the real-time operation status of the VFDs for on-site commissioning;> Parameter copying function of the keyboard;> The PWM overmodulation improves the utilization of busbar voltage and increases the output voltage of VFDs, hence is applicable to cases in...
发布时间: 2015 - 05 - 20
Technical features          1. So compact with a width, height and depth of 8.6 cm, 14.5 cm and 12 cm respectively only;       2. The panel supports external access that allow copying of parameters;       3. The standard RS485 interface constitutes an independent VFD network, making it possible to set the VFD as a master or slave for master-slave control;       4. Impulse/analog input and output channels;       5. 16 segments of speed control;       6. Multiple setting channels for running frequency/commands;       7. Provided with output terminals for disconnecting relays,...
发布时间: 2015 - 07 - 14
Technical features Unique suitability to applications that require waterproofing and dust-proofing or that are of serious pollution;> Unique metal enclosure for perfect heat dissipation;> Employing advanced surface powder coating process to provide select color and an elegant appearance;> Phosphorized metal plates provide good anti-rust and -corrosion performance;> Provided with IP54 fans for steady and reliable performance;> Input voltage: 3 AC 380 V ± 15%;> Input frequency: 47 - 63 Hz; power factor: ≥95%;> Control methods: Non-PG vector control and V/F control, where for V/F control, three profiles, i.e. straight line, polyline and multiple power, are available; > Running commands source: given through panels, terminals and RS485 communication;> Frequency giving source: given t...
发布时间: 2015 - 05 - 20
Technical features> Fast response and high starting torque: for better vibration control on starting;> Low torque ripple for more stable running;> Compact structure design and optional built-in braking units (for 30 kW and lower, braking units of standard configuration);> High overload resistance (3 s for 200% of rated loads). Perfect overvoltage suppression when applied in a punching machine;> Smart commissioning: smart setting of V/F profile that doesn’t need professionals for complex commissioning, saving manpower and time;> Compatible with synchronous motors: significantly conserves energy if combined with synchronous motors. Consumes the least power in case of equivalent unit torque;> Convenient human–machine interaction, real-time monitoring of key parameters, and LED + LCD dual-disp...
发布时间: 2015 - 05 - 20
Technical features       1.2.1 Employs high-performance current vector control, making it possible for induction motors to start with high torque.       V/F control:      1 Hz 150% torque (speed regulation range 60:1)      Open-loop vector control:  0.5 Hz 150% torque (speed regulation range 100:1)       Closed-loop vector control:  0 Hz 180% torque (speed regulation range 1,000:1)1.2.2 Various parameter adjustment modes  Static self-adjustment: best suitable to the commissioning where motors are connected with handling machines;  Rotating self-adjustment: best suitable applications where...
发布时间: 2015 - 04 - 16
Technical parametersInstructions of keyboard indicator lamps Indicator lampsNameMeaningUnit indicationHzFrequency indicator lampThe unit of currently displayed parameter is Hz (Hertz).ACurrent indicator lampThe unit of currently displayed parameter is A (Ampere).VVoltage indicator lampThe unit of currently displayed parameter is V (volt).Hz + ARevs indicator lampThe unit of currently displayed parameter is R/MIN (revolution/min).A + VPercentage indicator lampsThe unit of currently displayed parameter is % (percent).Hz + VMPa indicator lampsThe unit of currently displayed parameter is MPa (mega Pascal).Status indication(MON)Indicator lamps of command sourceOff: controlled through the keyboard.  On: controlled through the terminals.  Flashing: controlled through...
发布时间: 2015 - 05 - 20
Technical features  1. Usable under large grid fluctuation;  2. Provided with protection functions such as short circuit, low voltage, overvoltage, quick-acting fuses, overheating, etc.;  3. The braking IGBTs are ensured to work within the saturation zone.  Technical parametersModel:   CDBU300-XXXA-4 seriesFor VFDsAC power supply380 VPower0.75 kW - aboveOutput featuresMax. braking currentRefer to particular models.Activated voltage of braking690 V ± 10 VHysteretic voltage670 V ± 10 VPower supplyU (p+_p-)350 V - 800 VProtectionElectronic thermal relaysIn case of the temperature of cooling fins of the braking unit exceeds 85 °C, the protection is activated, the braking unit stops braking, and the malfunction indicator lamp ligh...
发布时间: 2015 - 04 - 09
Technical features     1.  Proprietary kernel encryption          • Proprietary new PLC encryption, eradicating any possibility of cracking.          • Multiple password protection, protecting users’ programs from malicious cracking.     2.  High-speed input          • 6 channels of high-speed counter, 2 channels 200 k + 4 channels 10 k.          • 2 channels of AB phase signal input, multiple settings.          • Built-in 32-digit high-speed comparators.          • Starts when co...
Products Product Details

CDE505 series IP54-rated VFD

Product parameters:
Based on the successful experience accumulated by Canworld Electrical in the long past, in compliance with IEC 60529 (EN 60529) and employing an integral enclosure, conformal coatings imported from Germany, waterproof cable connectors and waterproof fans, the VFDs with a high IP rating of IP54 are specially designed for harsh working conditions and can fulfill the needs from simple driving to advanced applications and stay operational in harsh circumstance.VFDs of this series can withstand the damage by dust, oil stains, high humidity, high temperature, acid corrosive matters and other waste, significantly increasing the service life of VFDs.
Scope of application:
Applicable to industries with rigorous working conditions, e.g. plastic, textile, printing and dyeing, food, machine tools, dust, ventilation equipment, etc.
Time to market: 2018 - 04 - 11
Product description:
Model recommendationsVFDs models and technical parameters of CDE505 IP54 series (three-phase 380 V input)VFD modelCDE505-Power capacity(kVA)Input current(A)Output current(A)BrakingunitDCreactorKeyboard4T1R53.05.03.8Standard configurationBuilt inNoStandard configurationSpecial for IP54 LEDKeyboard4T2R24.05.85.54T3R75.910.594T5R58.914.6134T7R51118174T0111726254T0152131.2304T0182439.2384T0223046.5454T0304062604T037577876OptionalExternalOptionalExternal4T045699391Dimension plan for CDE505 CP54AOverall and installation dimensions of CDE505 IP54 seriesExternal viewVFD modelCDE505-Overall dimensions (mm)Installation dimensions (mm)Dimension planHH1WDABBore diameterThree-phase 380 VWP54A4T1R522521912517090212Φ5CP54A4T2R24T3R728527016019091271Φ54T5R54T7R5317305170195110303Φ64T011410390225...
Product manual:
Technical features Unique suitability to applications that require waterproofing and dust-proofing or that are of serious pollution;> Unique metal enclosure for perfect heat dissipation;> Employing advanced surface powder coating process to provide select color and an elegant appearance;> Phosphorized metal plates provide good anti-rust and -corrosion performance;> Provided with IP54 fans for steady and reliable performance;> Input voltage: 3 AC 380 V ± 15%;> Input frequency: 47 - 63 Hz; power factor: ≥95%;> Control methods: Non-PG vector control and V/F control, where for V/F control, three profiles, i.e. straight line, polyline and multiple power, are available; > Running commands source: given through panels, terminals and RS485 communication;> Frequency giving source: given t...
  • Features
  • Description
  • Installation video
  • Success case
  • Related Products

Technical features

> Unique suitability to applications that require waterproofing and dust-proofing or that are of serious pollution;

Unique metal enclosure for perfect heat dissipation;

Employing advanced surface powder coating process to provide select color and an elegant appearance;

Phosphorized metal plates provide good anti-rust and -corrosion performance;

Provided with IP54 fans for steady and reliable performance;

Input voltage: 3 AC 380 V ± 15%;

Input frequency: 47 - 63 Hz; power factor: ≥95%;

Control methods: Non-PG vector control and V/F control, where for V/F control, three profiles, i.e. straight line, polyline and multiple power, are available;

 

Running commands source: given through panels, terminals and RS485 communication;

Frequency giving source: given through panels in numerals, analog quantity, RS485 serial communication, multi-speed simple PLC and PID;

 

Overload capacity: Type B: 60 s under 150% of rated current, 10 s under 180% of rated current; Type P: 60 s under 120% of rated current, 10 s under 150% of rated current;

 

Starting torque: 0.5 Hz/150% (non-PG vector control SVC); speed range: 1:100 (SVC); speed control accuracy: ±

0.5%;

Carrier frequency: 1.0 - 15.0 kHz, automatically adjustable according to temperature and load characteristics;

Frequency resolution: given in numerals: 0.01 Hz; given analog quantity: max. frequency multiplied by 0.1%;

Torque boost: manual torque boost: 0 - 30%;

Acceleration and deceleration methods: two acceleration and deceleration times of straight lines;

Braking: DC injection braking on both starting and shutdown;

Inching running: frequency range: 0.0 Hz - max. output frequency; deceleration time of inching: 0 - 3,600.0 s;

Simple PLC and multi-speed running: realizing operation of up to 16 segments of speed through the built-in PLC or control terminals;

Built-in process PID: for realization of closed-loop control when exceeding the range (pressure, temperature, flow, etc.);

Automatic adjustment of voltage: automatically maintains the output voltage in case of grid voltage fluctuation;

DC busbars that can be shared by multiple VFDs. The power is automatically balanced.




Model recommendations

VFDs models and technical parameters of CDE505 IP54 series (three-phase 380 V input)

VFD model

CDE505-

Power capacity

(kVA)

Input current

(A)

Output current

(A)

Braking

unit

DC

reactor

Keyboard

4T1R5

3.0

5.0

3.8

Standard configuration

Built in

No

Standard configuration

Special for IP54

 

LED

Keyboard

4T2R2

4.0

5.8

5.5

4T3R7

5.9

10.5

9

4T5R5

8.9

14.6

13

4T7R5

11

18

17

4T011

17

26

25

4T015

21

31.2

30

4T018

24

39.2

38

4T022

30

46.5

45

4T030

40

62

60

4T037

57

78

76

Optional

External

Optional

External

4T045

69

93

91


Dimension plan for CDE505

CDE505 series IP54-rated VFD 

CP54A

Overall and installation dimensions of CDE505 IP54 series

External view

VFD model

CDE505-

Overall dimensions (mm)

Installation dimensions (mm)

Dimension plan

H

H1

W

D

A

B

Bore diameter

Three-phase 380 V

WP54A

4T1R5

225

219

125

170

90

212

Φ5

CP54A

4T2R2

4T3R7

285

270

160

190

91

271

Φ5

4T5R5

4T7R5

317

305

170

195

110

303

Φ6

4T011

410

390

225

210

150

396

Φ6

4T015

 Dimension plan of Keyboard C (IP54)

Model: KEYC. Five-digit LED display, integrated with the cover of CDE505 series models, and hence does not support externally extended use

CDE505 series IP54-rated VFD


External view

VFD model

CDE505-

Overall dimensions (mm)

Installation dimensions (mm)

Dimension plan

H

H1

W

D

A

B

Bore diameter

WP54A

4T018

485

455

260

235

180

465

Φ7

CP54A

4T022

4T030

535

505

292

235

210

515

Φ7

4T037

605

570

310

280

240

585

Φ9.5

4T045

 

发布时间: 2018 - 04 - 11
Technical features:1. Wide voltage range inputPower voltage: -15% - 10%, 47 Hz - 63 Hz; provided with under-voltage underclocking output function that extends the applicable range of power voltage to -30% (e.g. extending the applicable range of a 380 V VFD to 266 V - 440 V); 2. High disturbance resistance Pulse group tests: ± 4,800 VStatic (air discharge): 8,000 VStatic (contact discharge): 6,000 VProvided with EMI circuit + lightning protection design3. Phase-phase and phase-to-earth short circuit protectionAny phase-phase short circuit protection 4. Anti-corrosion treatment8 µm nickel plating, and three layers of British conformal coating for key parts;5. Power source of control signals:  External power supply of +10 V and +24 V, both provided with shor...
发布时间: 2015 - 09 - 16
Technical features> Provided with an open-loop vector control permanent magnet synchronous motor, easy to wire and highly accurate in revs control, reducing on-site faults; > High dynamic responses, rapidly responding to the given value of speed while guaranteeing the stability of output revs, which allows the system to catch up with the load changes timely, thus increasing the operation efficiency of the system;> Premium overcurrent and overvoltage resistance;> The oscilloscope function of the background monitoring software monitors the real-time operation status of the VFDs for on-site commissioning;> Parameter copying function of the keyboard;> The PWM overmodulation improves the utilization of busbar voltage and increases the output voltage of VFDs, hence is applicable to cases in...
发布时间: 2015 - 05 - 20
Technical features          1. So compact with a width, height and depth of 8.6 cm, 14.5 cm and 12 cm respectively only;       2. The panel supports external access that allow copying of parameters;       3. The standard RS485 interface constitutes an independent VFD network, making it possible to set the VFD as a master or slave for master-slave control;       4. Impulse/analog input and output channels;       5. 16 segments of speed control;       6. Multiple setting channels for running frequency/commands;       7. Provided with output terminals for disconnecting relays,...
发布时间: 2015 - 07 - 14
Technical features Unique suitability to applications that require waterproofing and dust-proofing or that are of serious pollution;> Unique metal enclosure for perfect heat dissipation;> Employing advanced surface powder coating process to provide select color and an elegant appearance;> Phosphorized metal plates provide good anti-rust and -corrosion performance;> Provided with IP54 fans for steady and reliable performance;> Input voltage: 3 AC 380 V ± 15%;> Input frequency: 47 - 63 Hz; power factor: ≥95%;> Control methods: Non-PG vector control and V/F control, where for V/F control, three profiles, i.e. straight line, polyline and multiple power, are available; > Running commands source: given through panels, terminals and RS485 communication;> Frequency giving source: given t...
发布时间: 2015 - 05 - 20
Technical features> Fast response and high starting torque: for better vibration control on starting;> Low torque ripple for more stable running;> Compact structure design and optional built-in braking units (for 30 kW and lower, braking units of standard configuration);> High overload resistance (3 s for 200% of rated loads). Perfect overvoltage suppression when applied in a punching machine;> Smart commissioning: smart setting of V/F profile that doesn’t need professionals for complex commissioning, saving manpower and time;> Compatible with synchronous motors: significantly conserves energy if combined with synchronous motors. Consumes the least power in case of equivalent unit torque;> Convenient human–machine interaction, real-time monitoring of key parameters, and LED + LCD dual-disp...
发布时间: 2015 - 05 - 20
Technical features       1.2.1 Employs high-performance current vector control, making it possible for induction motors to start with high torque.       V/F control:      1 Hz 150% torque (speed regulation range 60:1)      Open-loop vector control:  0.5 Hz 150% torque (speed regulation range 100:1)       Closed-loop vector control:  0 Hz 180% torque (speed regulation range 1,000:1)1.2.2 Various parameter adjustment modes  Static self-adjustment: best suitable to the commissioning where motors are connected with handling machines;  Rotating self-adjustment: best suitable applications where...
发布时间: 2015 - 04 - 16
Technical parametersInstructions of keyboard indicator lamps Indicator lampsNameMeaningUnit indicationHzFrequency indicator lampThe unit of currently displayed parameter is Hz (Hertz).ACurrent indicator lampThe unit of currently displayed parameter is A (Ampere).VVoltage indicator lampThe unit of currently displayed parameter is V (volt).Hz + ARevs indicator lampThe unit of currently displayed parameter is R/MIN (revolution/min).A + VPercentage indicator lampsThe unit of currently displayed parameter is % (percent).Hz + VMPa indicator lampsThe unit of currently displayed parameter is MPa (mega Pascal).Status indication(MON)Indicator lamps of command sourceOff: controlled through the keyboard.  On: controlled through the terminals.  Flashing: controlled through...
Copyright ©2018 - 2023 Shenzhen Canworld Electrical Technology Co., Ltd 
Rhino Cloud provides enterprise cloud services
Address: China · Shenzhen · Baoan Central District · 3rd Floor, Building 15, F518 Fashion and Creative Park, Baoyuan Road
National unified customer service phone:
4000-888-699